CannabisSFE

CannabisSFE

- Capacité de 1 litre jusqu'à 10000 Psi

Pour visualiser les prix de vente et passer votre commande en ligne

Documentation

Description

- Système d'extraction de CO2 extensible d'un litre
- Capacité du navire de l'emballage de base de 1 litre
- Large plage de pression et de température (10 000 psi / 120 ° C)
- Pompe pneumatique pneumatique au CO2 efficace / pré-refroidisseur sans eau
- Passer au mode cascade - Peut produire jusqu'à 120 grammes / heure
(Dépend de la matière première)
- Facultatif: recyclage du CO2, sacs de matières premières, dispositif de chargement
- Navires et composants conformes au code ASME

System Specifications

Standard Configuration
Maximum Operating Pressure:10,000 psi (68.9 MPa).
Pressure Display:Pressure gauge for each processing vessel
Temperature Range:Ambient to 120˚C.
Temperature Precision:+/- 0.5˚C.
Temperature Display:PID Control/ LED. Displays internal vessel temperature.
CO2 Flow Rates:up to 200mls/min (~176 g/min) liquid CO2
Restrictor Valve:Heated up to 120˚C; Resistant to blockage up to 200mls/min. (~176grams/min.)
Integrated Waterless Chiller Assembly:The integrated Peltier waterless chiller uses thermoelectric cooling of the iquid CO2 from the delivery tank. The chilled CO2 is then delivered directly to the pneumatic supercritical fluid pump. Proper cooling of the CO2 before it arrives at the pump ensures that the CO2 is pumped in an efficient manner that eliminates pump cavitation to achieve the pressures and flow rates required for supercritical fluid extraction processes.
Sample Extraction Vessel:CannabisSFE accommodates up to three, 1000ml processing vessels
Collection Vessel:Externally mounted cone shaped cyclonic separator for ease in extract removal
Pre-heater:Improves temperature consistency of the fluid by heating the fluid before it reaches the main sample extraction vessel(s).
Over-Pressure Safeguards:Rupture disc assembly.
Instrument Control:Vessel and preheater temperature controlled by PID-Fuzzy Logic Controllers. Pressure controlled by manual regulator.
Dimensions:CannabisSFE basic package 1x 1000ml: Width: 27.00”, Depth: 14.36”, Height: 30.13”
Weight:CannabisSFE basic package: 140 lbs.
Available Options
Additional 1000ml Processing Vessel Assemblies
Allowing up to Full Cascade Operation:Easily field installed upgrades to processing capacity that allow added processing capabilities as needs evolve.
Sample Loading Fixture:Allows ease in loading raw materials into polyester 150 micron/100 mesh sample bags (or other sample bag materials) and into the 1000ml vessel of the CannabisSFE Unit.
Raw Material Sample Bags:1000ml polyester 150 micron/100 mesh sample bags. Allows ease in loading raw materials into and removing from the processing vessels.
Robot Couple Blixer3™:Grinding plant material will increase the surface area and load of material into the extractor which increases extraction efficiency. This grinder performs particle reduction fast and efficiently and will grind 300-400 grams of dried trim/flower down to approximately 200 microns in 3-4 seconds.
System Requirements
Power Requirements:220 VAC, 50/60 Hz.
Liquid Gas Supply:Liquid CO2 cylinder with dip tube.
House Air:Dry air, regulated to 110 psi (760KPa) and 15 SCFM.

Livraison

Nous contacter